|
This marble was set incorrectly, and lipage was poorly cut. (see next pic)
|
This is the same floor. We brought it back despite the abundance of large veining
|
This countertop was incorrectly set on the front rails. It had to be removed and reset
|
After setting the rail, we polished out the seams
|
|
Honing of limestone
|
This extensive countertop that had to be honed to remove the etches on the limestone
|
Floor with lots of lipage
|
This is the floor shown in the previous photo after it had been ground flat, and set, to ensure proper water drainage
|
|
Removing wax and polish from a dirty floor
|
Once removal was complete, we honed and light polished the floor. This finish will last 3-5 years, and eliminates any future need to strip wax
|
This was a deep crack
|
We first stabilized the slab. The crack was then filled
|
